Total 115 network engineer job vacancies in penang

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

Key Roles & Responsibilities

• Own end-to-end supplier quality performance, including qualification, onboarding, monitoring, and continuous improvement across assigned commodity or suppliers.
• Act as the primary quality interface between suppliers and internal teams including Engineering, Procurement, Operations, and R&D.
• Define and deploy robust supplier quality strategies aligned with business goals, focusing on risk mitigation, cost of poor quality (COPQ) reduction, and supply continuity.
• Establish, track, and continuously improve supplier KPIs (e.g., defect rate, yield impact, responsiveness, audit scores), and drive accountability through regular business reviews (QBRs/MBRs).
• Lead supplier qualification activities, including technical capability assessment, process audits, and quality system evaluation
• Define and optimize incoming inspection strategies based on risk assessment and supplier performance.
• Drive continuous improvement in incoming quality control processes to reduce inspection cost while maintaining quality standards.
• Drive structured problem-solving with suppliers using methodologies such as 8D, DMAIC, and root cause analysis (RCA), ensuring effectiveness and prevention of recurrence.
• Manage Supplier Corrective Action Requests (SCAR), including issuance, follow-up, verification of root cause, and validation of corrective/preventive actions
• Conduct regular on-site and remote audits (process, system, layered process audits), identifying gaps and driving closure of findings.
• Evaluate and approve supplier change requests (process, material, location, sub-tier suppliers) and ensure proper change control, risk assessment, and validation prior to implementation.
• Partner with suppliers to improve process capability (Cp/Cpk), yield, and overall manufacturing robustness through data-driven improvement initiatives.
• Drive early detection and containment of quality issues through implementation of effective incoming quality controls, supplier self-inspection, and FMEA .
• Lead escalation management for critical supplier issues impacting production, ensuring rapid containment, cross-functional alignment, and executive-level communication when needed.
• Develop supplier capability through training, technical coaching, and joint improvement projects to elevate maturity in quality systems and manufacturing processes.
• Ensure compliance with regulatory, environmental, and customer-specific quality requirements across the supply base.
• Drive digitalization and automation of supplier quality processes, leveraging data analytics tools (e.g., Minitab, Spotfire, Power BI) to enhance visibility, predictive insights, and decision-making.
• Translate complex data into actionable insights for both internal stakeholders and suppliers
• Drive IMS activities within department

Contamination Control & Cleanliness Management

• Define and enforce contamination control requirements across the supply base, particularly for critical components 
• Assess and qualify supplier cleanroom environments, including classification, airflow design, gowning protocols, and material handling practices.
• Conduct contamination-focused audits at supplier sites, covering:
• Cleanroom discipline and behavior
• Equipment cleanliness and maintenance
• Packaging and transportation controls
• Drive implementation of contamination prevention controls such as:
• Poka-yoke for handling and storage
• Controlled packaging (vacuum, nitrogen, double-bagging)
• Cleaning and bake processes validation
• Drive supplier capability improvement in contamination control through training, benchmarking, and joint improvement programs.
• Establish data-driven monitoring using analytics tools (Minitab, Spotfire, Power BI) to identify trends in contamination-related defects and proactively mitigate risks.
• Ensure compliance with industry standards and internal specifications related to cleanliness and environmental control.

The Junior Packaging Engineer is an entry-level engineering role designed for fresh graduates or early-career engineers eager to build expertise in packaging design, testing, and qualification within a world-class technology company.

You will work closely under the guidance of Senior Packaging Engineers, gaining hands-on experience across packaging design, lab testing, vendor coordination, and cross-functional collaboration. This role is a strong foundation for a long-term engineering career at Western Digital.

Key Responsibilities : 

Design & Documentation

• Assist in packaging design and development activities under senior engineer supervision
• Prepare and maintain packaging specifications, BOMs, and technical drawings
• Support CAD modeling and packaging structure updates

Testing & Qualification

• Execute packaging tests per ISTA/ASTM protocols (drop, vibration, compression, climate)
• Record, compile, and analyze test data; prepare test reports
• Assist in packaging qualification documentation and ECO submissions
• NPI & Sustaining Support
• Support NPI packaging activities including sample preparation and testing
• Assist in sustaining engineering tasks — ECOs, deviation requests, and change implementations
• Coordinate with manufacturing teams on packaging-related issues

Vendor Coordination

• Assist in coordinating with packaging material suppliers for sample procurement
• Support supplier qualification activities under senior engineer guidance

Compliance & Quality

• Ensure work is conducted in compliance with WD quality and safety standards
• Assist in maintaining packaging documentation within WD QMS

Learning & Development

• Actively participate in training programs and technical workshops
• Shadow senior engineers on complex projects to build technical competence
• Take ownership of assigned tasks and deliver on time

• To formulate maintenance plan for new equipment and machines based on inputs from station owners and suppliers.
• Perform troubleshooting based on troubleshooting guide from station owners and study on eliminating the problem from repeating.
• Liaise with station owners and machine suppliers on continuous improvement.
• To train, coach and develop technicians to handle test stations effectively in the area of troubleshooting and sustaining.
• To manage and ensure all manufacturing documents related to maintenance are being prepared and uploaded accordingly and promptly before release for manufacturing operations.
• To optimize and improve equipment reliability and design.
• To execute related activities to meet key performance indicators of department goals and drive for continuous improvement with realistic goal setting together with the team.
• To evaluate Test Technicians performance according to department and individual goals
• To summarize breakdown report and feedback to line support team for improvement (MTTR and MTBF).
• To execute any other related duties assigned by immediate superior from time to time.

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

This role is part of a Global Endpoint computing team, responsible for development, standardization, and management of the company’s global PC and mobile device infrastructure.

• Manage and maintain a global co-managed Intune and Configuration Manager environment with of over 25,000 endpoints
• Develop and perform software deployments and operating system configuration changes using various software development & automation techniques.
• Provide direct 3rd line end user support for escalated PC and mobile device issues and needs.
• Work with vendors as needed to resolve application or end user issues.
• Identify improvements in existing functionality and recommend enhancements.
• Manage and deliver project activities as part of the overall roadmap.
• Be able to investigate issues under tight time constraints and be able prioritize work accordingly.
• Be able to work with minimal supervision.
• Write and maintain appropriate documentation

Key Performance Measures

• The availability of the Microsoft Endpoint manager services to the business.
• Delivering project goals to the required standard and on time.
• Resolving personally assigned incident tickets promptly to the expected standard.

• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

The role of tribology engineer is to set up or develop component media mechanical interface test to simulate hard disk drive reliability performance. It is crucial to assist media R&D team to develop reliable tribology design

• Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
• Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
• Analyze test data using statistical software and develop comprehensive technical reports
• Collaborate with cross-functional teams to integrate tribological insights into product development and optimization
• Present findings and recommendations to diverse audiences, including management and global teams  
• Contribute to the development of new testing methods and equipment to enhance tribological analysis capabilities
• Taking charge of tribology testers maintenance, spare parts inventory management and hardware upgrading activities 

Sustaining Staff Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA).  

Staff Product Engineers Logistic will be a critical part of our sustaining team, ensures product continuity after mass production.  We are seeking a Product Engineer who has strong back ground in Product Engineering. This role is crucial to ensure execution of sustaining projects and also proactively monitor production supply chain.  The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, and extend product lifecycle.

Key Responsibilities

•  Manage and maintain BOM system.  This will be a crucial on-going task to ensure production system operates flawlessly.  Candidate will be trained to generate and mainitain BOM of all PCP products in new Renesas system.
• Sustain multiple products lifecycles, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Generating and monitor engineering build requests to support qualification/validation builds and customer samples.
• Generate weekly yield/variance monitor report and recommend actions.
• Generate and monitor SBL/SYL updates
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Work with several data base system to generate useful reports to help drive sustaining team productivity. 

Analog and Mixed Signal Business Unit (AMS) is looking for a Staff Product Engineer to join our team to drive the product development of state-of-the-art products. This is a unique and exciting opportunity to work with a cross-functional team to bring a product to volume production starting from product conception to production release. The job scope includes but is not limited to, development of the test plan to ensure datasheet specifications are met. Own the qualification plan and the execution to comply with various JEDEC/AEC quality standards. Own product quality assessment through reliability tests. Collaborate with multi-functional teams such as Design, Test, Applications and Failure Analysis teams during first silicon debug and to root cause field failures. Creation and maintenance of product BOM. Monitor production data to address yield and quality deficiencies using statistical analysis.

Key Responsibilities

• Full PE product lifecycle ownership from concept to end of life with a focus on ensuring the delivery of the highest quality products to our end customers
• Provide support for DfT, Product releases and Qualifications in Penang
• Compliance to Jedec and AEC standards
• Datasheet and automotive compliance reports
• Real time customer support for design, product and quality related issues
• Temperature/Voltage/Process characterization and production limit setting
• Product new product introduction and yield ownership
• Product BOM release and maintenance
• Excursion management for both suppliers and customers
• Use commercially available yield tools for yield improvement and monitoring, generate weekly reports and review with PE teams
• KPI achievement in product related deliverables including NPI execution and velocity, product cost (Gross margin improvements), product quality performance and failure analysis cycle times
• PAT, SYL, SBL, SPC limit and disposition optimizations to protect quality without excessive waste

Sr Product Engineers ensures product continuity after mass production by manage products lifecycle, resolving production/ customer issues, and improving COGS.  We are seeking a Product Engineer to join our team with a primary focus on sustaining engineering activities. This role is critical in ensuring the long-term quality, reliability, and manufacturability of our power IC products. The ideal candidate will collaborate with cross-functional teams—including design, test, manufacturing, and quality—to support mature products in high-volume production, drive yield improvement, resolve customer issues, and extend product lifecycle.

Key Responsibilities

• Sustain multiple products lifecycle, production and compliance. Oversees high volume PCP Products mass production manufacturing across all internal factory and subcons
• Sustaining Product COGS improvement and process optimization such as Yield/Volume/Test Time/failure improvements. Improve Test process and prevent potential quality excursions.
• Manage and mitigate risk in PCRB (Process Change Review Board) to keep delivery by supporting product qualifications, second-source/material changes, and process migrations/improvements.
• Disposition of abnormal lots, low yielding lots or production issues
• Cross function interface with Operation, QA, Reliability, Factory and OSAT
• Monitor and resolve manufacturing and test issues, working closely with fab, assembly, and test sites.
• Analyze product performance, failure modes, and reliability to support customer returns (RMA/FA). 

• Specifically to carry out process capability and development programs related to Lube Process
• Carry out Lube Cpk, instruments’ EMP and Gauge R&R improvement activities
• Process transfer for new products implementation
• Plan and implement cost improvements or savings for Lube Process
• Yield/Defect/Quality improvement
• New software and project propagation buy off
• Synergy with ETA for new equipment development
• Machine PPH Improvement via process development and improvement
• Assist second source development for Lube Process
• Maintain and establish documentation and FMEA leadership for Lube Process
• New Equipment Qualification
• Continue support ACD Process
• Conduct training for new engineers and cross site teams who need to understand Lube Process.
• Subject Matter Expert for Lube Process.

Job Description

Essential Responsibilities:

• Analyze reject disks using microscopes and advanced equipment (AFM, SEM EDX, Wyko, Zygo, OSA) to identify and classify defects.
• Interpret defect analysis results, including SEM EDX data, and compile failure analysis reports.
• Lead discussions with process owners on defect issues and work to address unknown defects.
• Track and monitor yield performance using EIS and Spotfire, including viewing iris mapping and disk quality performance (KPOV).
• Coordinate with FA Tech to ensure correct reject disks are pulled for analysis.
• Develop and implement corrective and preventive actions (CAPA) to improve defect rates.

• Understand product PLM systems and maintain databases with high accuracy (Agile / SCORE / Ariba).
• Develop monthly capacity forecast models for Penang, subcontractors, Dresden, and internalization.
• Prepare factory capacity plans to support revenue targets.
• Lead monthly gross margin improvement projects, including continuous capacity improvement and internalization to internal factories.
• Proactively identify capacity improvement opportunities and collaborate with cross‑functional teams to execute action plans.
• Perform on-the-job monitoring of bottleneck equipment to ensure revenue plans are met.
• Conduct time studies for all processes (Sort, Test, Backend).
• Perform labor resource studies, planning, and optimization.
• Manage internalization project transfers from REN Power and REN P&C.
• Prepare and support company project transfer activities.
• Support NPI (New Product Introduction) project bidding.
• Develop and review factory layouts using AutoCAD.
• Understand, monitor, and improve equipment OEE, including performance maintenance. 

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support ME and QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Product Engineering or Program Management
• Lead internal team for NPI and Sustaining Products qualification and continuous improvement activities to meet product requirements.
• Involve heavily in collaboration with other functions and departments to achieve goals.
• Data analysis skills for processes and products correlation.  

1. Ensure Maintenance Key Performance Indicators (KPIs) — including MTBF, MTTR and MWT — for production lines consistently meet or exceed set targets.
2. Execute all relevant activities to achieve departmental KPIs (S,Q,D,C), while driving continuous improvement through realistic goal setting in collaboration with the team.
3. Lead or support root cause analysis using structured methodologies such as Fishbone Diagram, Why- Why, Is/Is not analysis.
4. Ensure all maintenance-related content and documentation reflect the most current data and insights to support informed decision-making and continuous process optimization (PDCA, SPL, OCAP, PSS.PFMEA,CP)
5. Actively participate in Value Stream Daily Leadership Review (DLR) and MyKATA sessions to align with operational priorities and drive engagement.
6. Contribute meaningfully to Value Stream Continuous Improvement Projects (CIP) on a quarterly basis, supporting long-term performance enhancements.
7. Perform troubleshooting and repair of for equipment related issues involving mechanical, electrical and PLC automation systems
8. Collaborate closely with process owners and other stakeholders to resolve quality issues, technical issues and implement improvement initiatives effectively.
9. Train, coach, and develop technician technical know-how to independently and effectively handle assembly station troubleshooting and sustainment activities.
10. New project early involvement to evaluate equipment performance and TPM readiness with technical analysis for rational decision justification. Manage and ensure timely preparation and uploading of all maintenance-related manufacturing documents prior to operational release.
11. Participate actively in TEF departmental initiatives such as Lean After Lean, Digitalization and Automation Projects, and BPS-TPM activities.
12. Carry out any other duties as assigned by the immediate superior, ensuring flexibility and commitment to team and organizational goals.

Are you a recent graduate passionate about electronics, testing, and problem-solving? We are looking for enthusiastic individuals to:

• Set up new products and enhance test strategies for existing products to improve test efficiency, yield, and production capacity.
• Support our QA team by analyzing customer failure samples and developing programs to prevent similar issues in the future.
• Train and guide technicians to streamline daily repair operations.
• Troubleshoot test boards and testers when IC failures occur, and implement permanent solutions.
• Ensure smooth operation of test stations by monitoring performance, stability, and robustness, and investigating any deviations.
• Gain hands-on experience with ATE tester platforms such as Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX, and LTX.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support system comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

The Senior Packaging Engineer will lead packaging development and qualification activities for WD's HDD and Flash storage products. This is a technically hands-on and cross-functional leadership role — you will mentor junior engineers, drive complex packaging programs, and interface directly with customers, suppliers, and global engineering teams.

You are expected to operate with high autonomy, make independent technical decisions, and represent the Packaging Engineering function in NPI and sustaining programs.

Key Responsibilities : 
Technical Leadership

• Lead end-to-end packaging design, development, and qualification for complex HDD/Flash programs
• Define packaging architecture and material strategy for new and sustaining products
• Make independent technical decisions on packaging design trade-offs (cost vs. protection vs. sustainability)
• Act as Subject Matter Expert (SME) for packaging within cross-functional teams

Design & Qualification

• Own packaging qualification plans and test execution per ISTA/ASTM standards
• Review and approve packaging specifications, BOMs, and qualification reports
• Lead Engineering Change Orders (ECOs) and deviation requests
• Drive DFM (Design for Manufacturability) and DFA (Design for Assembly) reviews

NPI & Program Management

• Lead packaging workstream for NPI programs from concept to mass production
• Manage packaging milestones and deliverables within program timelines
• Interface with global product teams, customers, and contract manufacturers

Vendor & Supply Chain

• Develop and qualify new packaging suppliers in Malaysia/ASEAN
• Lead supplier performance reviews and cost negotiation
• Drive packaging cost reduction (cost down) initiatives

People & Mentorship

• Mentor and coach junior/mid-level packaging engineers
• Conduct technical reviews and provide guidance on complex issues
• Support team capability building and knowledge sharing

Compliance & Sustainability

• Ensure all packaging meets regulatory requirements (RoHS, REACH, ISTA)
• Champion WD sustainability goals through eco-packaging innovation
• Maintain quality documentation per WD QMS standards

Continuous Improvement

• Lead RCCA for field packaging failures and damage incidents
• Drive Lean/Six Sigma improvement projects within packaging function
• Benchmark industry trends and propose technology upgrades