Total 7 software engineer job vacancies in Quality Assurance / Control category in Malaysia

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Responsible as the line/process quality for the Sensors and ASICs production line. Ensure the line/process is complied with quality requirements. Interfacing with Process/ Equipment Engineer.
• Responsible for the product quality for Sensors and ASICs, internally and externally, including incoming product quality issues and customer issues. Interfacing with Product Engineer, Simultaneous Engineering (SE) Team, Central Customer Quality Engineer and/or Central Supplier Quality Engineer.
• Responsible to key in report, generate quality notification in SAP such as Q-Info, Delivery Release and QM-View.
• Responsible for the problem-solving coordination and moderation for the quality issue internally and externally as Problem Solving Expert.
• Responsible as the SPC coordinator for the Sensors and ASICs line.
• Support as PgP5 Internal Auditor, including audit execution, closing and effectiveness verification of audits focus on IATF 16949 and VDA 6.3.
• Support any external/customer audits, including follow-up and closing of related OPL.
• Support department 6S activity.
• Support change management 4M checklist verification.
• Support lessons learned activity. Sharing input to the lesson learned plant coordinator. 
• Support MSA study, including review of MSA study reported by Process/Equipment Engineer.
• Support Daily Leadership Meeting for any quality issue regarding Sensors and ASICs line.
• Responsible for return materials to supplier, including the improvement of the return process.
• Responsible for IB process for return material from customers.
• Responsible for continuous improvement in the area of responsibility.
• Execute any other related duties assigned by supervisor from time to time.

• To formulate maintenance plan for new equipment and machines based on inputs from station owners and suppliers.
• Perform troubleshooting based on troubleshooting guide from station owners and study on eliminating the problem from repeating.
• Liaise with station owners and machine suppliers on continuous improvement.
• To train, coach and develop technicians to handle test stations effectively in the area of troubleshooting and sustaining.
• To manage and ensure all manufacturing documents related to maintenance are being prepared and uploaded accordingly and promptly before release for manufacturing operations.
• To optimize and improve equipment reliability and design.
• To execute related activities to meet key performance indicators of department goals and drive for continuous improvement with realistic goal setting together with the team.
• To evaluate Test Technicians performance according to department and individual goals
• To summarize breakdown report and feedback to line support team for improvement (MTTR and MTBF).
• To execute any other related duties assigned by immediate superior from time to time.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Continuous improvement of production test programs for automotive ICs on Automated Test Equipment (ATE)
• Support/lead tasks and projects from development to release for mass production
• Improve test programs for quality, test time and yield by modifying existing or introducing new test methods
• Modify or enhance corresponding test specifications
• Execute release activities to qualify modifications for production usage
• Collect and analyze data to secure test methods in full self-responsibility
• Cooperate with different development and production teams at various locations including both internal functions and external suppliers
• Transfer test techniques between different tester platforms or locations
• Special condition – If required, candidate must be willing to travel for Short Term Assignment (STA) with the duration of 6 months.

To work on the following tasks with guidance:
1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team
accordingly to following requirement:
a. To track project budget and ensure equipment cost within the planed budget.
b. On time delivery of test systems to the production line according to project milestone (include
manage of equipment, hardware interface and mechanical jig and fixture purchase)
c. Release the test system according to Test System Release Procedure.
d. To train and coach maintenance team to be able to handle test system breakdown more
effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target.
(eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System
Setup guideline and test fixture and job design concept)

2. To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:
• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine
efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling
from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.