Total 107 Others/Any level Maintenance / Repair / Technician job vacancies in penang

職位描述

• 負責光伏專案及現場設施的低壓（LV）電力系統（主配電箱/小型配電箱/配電箱）的運作和監控。
• 確保太陽能安裝場址和營運的電力供應穩定、安全和持續。
• 對電氣系統、太陽能光電模組及相關設備進行預防性維護（PPM）。
• 排除電氣故障，包括跳脫、短路、過載和系統故障
• 執行緊急維修以恢復供電並最大限度地減少停機時間
• 操作和維護備用系統，例如發電機、UPS 和 ATS。
• 確保所有電氣和太陽能安裝工程均符合安全標準和法規。
• 維護維護記錄、現場日誌和檢查報告
• 與技術人員和專案團隊協調維護和現場支援活動

資格/經驗及要求

• 必須持有有效的A4級電工證書
• 有太陽能光電系統、電氣維護或設施管理經驗者優先考慮
• 精通低壓電氣系統、開關設備、逆變器系統和備用系統（發電機/UPS/ATS）
• 能夠獨立排除電氣和系統故障
• 精通電氣安全及現場安全規程
• 願意在需要時輪班或隨叫隨到。
• 責任感強、自律性高、有良好的團隊合作精神
• 能夠在快節奏的專案/現場環境中獨立工作

福利待遇

• 個人休假
• 僱員公積金及社險
• 個人發展機會

Job Description

• Responsible for operation and monitoring of low voltage (LV) electrical system (MDB / SMDB / DB) for solar PV projects and site facilities
• Ensure stable, safe, and continuous power supply for solar installation sites and operations
• Carry out preventive maintenance (PPM) for electrical systems, solar PV components, and related equipment
• Troubleshoot electrical faults including tripping, short circuit, overload, and system failure
• Perform emergency repair to restore power and minimize downtime
• Operate and maintain backup systems such as generator, UPS, and ATS
• Ensure all electrical and solar installation works comply with safety standards and regulations
• Maintain maintenance records, site log books, and inspection reports
• Coordinate with technicians and project teams for maintenance and site support activities

Qualification / Experience & Requirements

• Must possess valid Chargeman A4 Certificate
• Experience in solar PV system, electrical maintenance, or facility management is preferred
• Good knowledge of LV electrical systems, switchgear, inverter systems, and backup systems (generator / UPS / ATS)
• Able to troubleshoot electrical and system faults independently
• Strong understanding of electrical safety and site safety procedures
• Willing to work shifts or on-call when required
• Responsible, disciplined, and good teamwork attitude
• Able to work independently in a fast-paced project/site environment

Perks & Benefits

• Personal leave
• EPF & SOCSO
• Personal development opportunities

我們歡迎任何與CNC工具機製造相關的職位申請。

職責：

• 根據提供的圖紙，設定獨立機器並進行偏移調整。

• 要求：不一定要持有文憑/學士學位等證書或經驗，但如有則優先考慮。
• 相關工作經驗者優先考慮。
• 語言能力強，英語和馬來語書面及口語表達能力俱佳。
• 了解遊標卡尺、千分尺和千分錶等基本測量工具。
• 積極主動、樂於學習、勤奮努力、以結果為導向，並具備團隊合作精神。
• 良好的溝通和人際交往能力。
• 能夠獨立工作。
• 我們將提供培訓。
• 如果您能夠獨立進行程式設計和設置，我們可以進一步討論薪資待遇。
• 歡迎應屆畢業生申請。

福利待遇

• 津貼（旅費、交通費等）
• 出席福利
• 個人休假
• 小組診所
• 僱員公積金及社險
• 個人發展機會
• 遠距辦公的彈性

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

• Requirements: Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper , micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF & Socso
• Personal development opportunities
• Remote work flexibility

Requirements:

• Degree in Mechanical / Electrical and Control Engineering or equivalent
• At least 3 years of working experience in related facility management and system
• Good technical knowledge in electrical, mechanical, HVAC, air compressor, building maintenance system etc.
• Good management and planning skills
• Good analytical, communication and interpersonal skills
• Candidates proficient in computer applications, AutoCAD & software (Microsoft Word, PowerPoint, and Excel).
• Experienced in equipment and process validation: DQ, IQ, OQ and PQ
• 1 Full-Time position available.
• To be based in Bukit Mertajam, Pulau Pinang.

Responsibilities:

• Develop routine annual and monthly maintenance plans
• Ensure that no interruption to all utilities at all time through good maintenance program
• Provide design proposals, perform engineering calculations, planning, install, and/or maintain mechanical & electrical, or other facilities infrastructure systems
• Schedule and perform routine checks on infrastructure e.g. electrical, mechanical, fire system etc.
• Plan, direct and coordinate activities related to design, construction, modification and maintenance of equipment and machinery within the facility
• Conduct daily routine inspection
• Maintain and improve quality and reliability of water system, Air Compressors, HVAC, CDA and Chiller
• Lead root cause analysis and implement long-term solutions
• Quickly respond to equipment breakdowns and emergencies to restore production operations
• Capable of troubleshooting and preparing reports on issues and incidents
• Prepare all required specification, standard operating procedures (SOPs) and working instruction and ensure all documentations are properly updated and maintained
• Develop and review operational procedures and provide training before hand-over to operation
• Identify and recommend opportunities related to energy conservation and take necessary action for cost reduction
• Improve and standardize equipment, simplify operations, enhance productivity, and develop new production technologies
• Enforce safety rules and regulations across the departments to achieve zero accident

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Paid training and development

職責：

• 操作、維護和排除工廠公用設施系統的故障，包括電力分配、壓縮空氣系統、冷凍水和冷卻系統、暖通空調、氣體供應、洗滌器系統和廢水處理廠 (WWTP) 設備。
• 進行水樣採集和基本實驗室測試（例如，pH值、COD、BOD、TSS），分析結果，並根據需要調整化學投加量，以確保符合標準。
• 確保生產線和關鍵設備公用設施的穩定持續供應。
• 監控公用設施運作並識別異常情況，以防止生產停機。
• 依主管安排，執行一般維護和雜務任務。
• 對所有設施和公用設備執行預防性維護（PM）活動。
• 在盡量減少對生產幹擾的情況下，進行故障排除和糾正性維修。
• 找出反覆出現的問題，並支持根本原因分析和糾正措施的實施。
• 在生產時間內提供現場技術支援。
• 對任何影響生產的設施相關問題及時作出反應。
• 從設施角度協助機器安裝、搬遷和調試。
• 確保符合環境、健康與安全、消防安全和監管要求。
• 遵守停機/啟動程序、工作許可製度和承包商安全準則。
• 支援內部稽核、客戶審計和監管檢查。
• 參與緊急應變情況（例如，停電、瓦斯外洩、火警、漏水）。
• 準確記錄維護情況、故障報告和公用事業消耗。
• 支持 5S 管理實踐，保持設施區域的良好衛生狀況。
• 為設施相關的緊急情況提供隨叫隨到或輪班支援。
• 執行公司指派的其他任何任務。

要求：

• 工程專業（電氣、機械、機電一體化或相關領域）最低文憑或證書。
• 至少有 1-3 年工廠設施、公用設施或維護環境的工作經驗。
• 具備電力分配、暖通空調、壓縮空氣、冷凍水和廢水處理系統等設施系統的基本知識。
• 具備對設備進行基本故障排除和維護的能力。
• 熟悉預防性維護（PM）措施和安全規程。
• 了解 EHS（環境、健康與安全）要求和監管標準者優先考慮。
• 能夠適應快節奏的製造環境並滿足生產需求。
• 願意在需要時輪班工作、隨叫隨到或在緊急情況下工作。
• 良好的團隊合作、溝通和解決問題的能力。
• 責任感強，自律性高，能夠在極少監督下獨立工作。

福利待遇

• 津貼
• 醫療保險
• 開放文化

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

Pentrac Itron is seeking a conscientious Electronic & Electrical Technician that will be in charge of performing standard calibration processes on a variety of specialized equipment and responsible for recording and analyzing the results. 

The main role of the Electronic & Electrical Technician is to troubleshoot, problem solve and provide technical information to allow informed decision-making. The role will involve assisting technical teams with recommendations to resolve laboratory problems, roadblocks or equipment malfunctions that impact the performance or validity of testing. 

Job Duties:

• Calibration of equipment, including troubleshooting, problem isolation & provide technical information for customer to make decision wisely.
• Maintenance of the various calibration equipment and platforms.
• Manage record retention for all Calibration Lab operations as needed.
• Identify non-conforming works related to calibration and report to Manager.
• Cal factors data entry.
• Compile reports for customer notification or problem resolution.
• Perform safety tests on equipment.

Perks & Benefits

• 13th Month Bonus
• Allowance (transportation, meal etc.)
• Central location
• Casual dress code
• Medical insurance
• Personal leave
• Performance Incentive

Pentrac Itron 正在尋找一位認真負責的電子電氣技術員，負責對各種專用設備執行標準校準程序，並負責記錄和分析結果。

電子電氣技術員的主要職責是排除故障、解決問題並提供技術信息，以支援決策。該職位需要協助技術團隊提出建議，以解決影響測試性能或有效性的實驗室問題、障礙或設備故障。

工作職責：

• 設備校準，包括故障排除、問題隔離，並向客戶提供技術信息，以便他們做出明智的決策。
• 各種校準設備和平台的維護。
• 根據需要管理所有校準實驗室操作的記錄保存。
• 找出與校準相關的不合格工作並向經理報告。
• 校準因子資料錄入。
• 編制報告，用於通知客戶或解決問題。
• 對設備進行安全測試。

福利待遇

• 第13個月獎金
• 津貼（交通、餐飲等）
• 中心位置
• 休閒著裝要求
• 醫療保險
• 個人休假
• 績效激勵

REQUIRED:

• Diploma in any Engineering

PREFERRED:

• Work on a 12-hour shift rotation.

• Perform machine preventive maintenance and maintain accurate maintenance records.

• Act as the first line of response for unscheduled machine downtime and quality-related issues.

• Collaborate effectively with cross-functional departments to support operational efficiency.

• Able to respond to sudden changes and work effectively under pressure to restore machine operations within a short timeframe.

SKILLS:

• Capable of analyzing and providing detailed feedback on major equipment downtime, including chronological events and corrective actions taken.

• Knowledge of Statistical Process Control (SPC) is an added advantage.

• Possess strong knowledge of Automation and Control Systems.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Provide Technical training and certification for junior technician.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead daily sustaining activities for Sputter equipment to ensure high equipment uptime and optimal performance.
• Support Engineers to monitor and drive continuous improvement on key KPIs such as OEE, MTBF, MTTR, Unscheduled downtime and PM effectiveness.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.
• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Lead problem-solving sessions and provide technical guidance to junior technicians.
• Participate in spare parts review, critical spare strategy, and cost optimization initiatives.
• Ensure safety protocols and cleanroom discipline are strictly followed during maintenance activities.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

As Manufacturing Process Engineering Technician, you will be responsible for maintaining specific tools on a manufacturing production or NPI line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively. You will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Communicates with engineers and technical specialist regarding sputter metrology tools measurement results and calibration procedure. Able to revise any documents changes regarding sputter metrology tools.

Regular Responsibilities

• Lead shift technicians to carry out daily shift work.
• Troubleshoot and resolve sputter instrumentation issues.
• Maintain and update sputter instrument documentation including standard work procedures, process specifications, etc.
• Facilitate small process improvement projects through collection and analyzing data and monitoring engineering trials.
• Entering and compiling data relating to metrology measurement.
• Training in the functions of the new project launches.
• Always adhere to safety guidelines and cleanroom protocols.
• Carry out periodic samples housekeeping & other tasks assigned by Engineer.
• Comply and support EHS policy. Participating in company activities such as IMS, 6S, RBA, BCMS etc.

• Lead, manage and take ownership on the overall operational health of the HVAC and Mechanical system
• Maintain, operate all HVAC systems and associated equipment, plumbing systems, building management system, and equipment repairs
• Manage capacity and design changes according to the requirements from manufacturing/customers
• Conduct and execute facility system improvements on reliability hardening, safety performance as well as cost optimization and reduction
• Perform facility inspections and report on condition affecting operations.
• Monitor and supervise HVAC preventive maintenance outsource service contracts
• Maintain compliance to local city and state government requirement and overall country legal legislation, ordinances and codes of practices.
• Liaison with relevant local government agencies and contractors
• Engage and liaison with consultants on mechanical system design and construction.
• Respond to emergencies.
• Comply with all safety procedures, practices and requirements
• Support any afterhours building needs and activities as required
• Attend training sessions and seminars and other assigned tasks as requested.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

1. To establish the operation procedure, system monitoring & repair maintenance of responsible sections.
2. To review & analyze the operating data to optimize the Facilities operating system
3. To support production / manufacturing needs and request
4. To team up with all the facilities peers & contractors in troubleshooting the Facilities system
5. To identified & drive the cost saving & improvement program
6. To supervise contractor engineer and technician, routine job to ensure the HVAC & Mechanical system supporting production comply to specification and government regulation
7. Manage Mechanical System for multiple Plants.
8. To plan, organize, execute & control for the specific project
9. To ensure compliance to IMS requirement, Contamination Control, 5S & Safety
10. To liaise with contractor, consultant on the facilities related matters
11. To coordinate the major plan shutdown maintenance
12. To carry out special task as assigned by supervisor
13. To support the activities to the company needs

Crown Equipment Sdn. Bhd. is looking for a dedicated and skilled individual to join our team as a Service Technician in our Field sites. In this hands-on role, you will be responsible for the diagnosis, maintenance, and repair of a variety of forklift, reach truck, pallet truck, other material handling equipment, ensuring reliability and safety for our clients.

Your expertise will be instrumental in troubleshooting technical issues, performing scheduled maintenance, and executing repairs in a timely and efficient manner. You will work closely with our service team and other technicians to enhance customer satisfaction and ensure equipment performance meets industry standards.

We are seeking a proactive individual with a strong technical background and a passion for problem-solving. If you are eager to develop your skills and contribute to a team that values quality, safety, and innovation, Crown Equipment Sdn. Bhd. is the perfect place for you to advance your career.

Responsibilities

• Complete jobs assigned for the day
• Maintain an accurate daily record of hours worked vs hours paid
• Complete all necessary Job Reports and Planned Maintenance(PM) Inspection Reports
• Complete PM services per the relevant truck procedure within the standard times
• Maintain tools and equipment to the Company's standards
• Report any breakages or loss of tools to your service management representative

• Diagnose and repair mechanical and electrical issues on various types of material handling equipment specifically Forklift.
• Perform scheduled inspections and preventative maintenance to ensure optimal performance.
• Maintain detailed records of service activities and parts used in repairs.
• Stay current with industry standards, safety protocols, and technical advancements.
• Provide exceptional customer service and communicate effectively with clients regarding repairs and maintenance.
• Participate in training programs to enhance technical skills and knowledge of equipment.

• SPM, Diploma or equivalent in Mechanical Engineering, Electrical Engineering, or a related field SKM, etc.
• Possess good electrical/mechanical aptitude or knowledge in machinery equipment is preferred.
• Experience in maintenance repair and overhaul in automotive engine will be an added advantage.
• Good communication skills and committed to work.
• Open to all Malaysian diploma or vocational certificate graduates from IPTA/IPTS.
• Proven experience as a forklift / service technician or mechanic in a similar industry.
• Strong mechanical and electrical troubleshooting skills.
• Excellent problem-solving abilities and attention to detail.
• Ability to work independently and in a team-oriented environment
• Have valid driving license: B2, D, GDL (Advantage)
• Good in Bahasa and got basic command in English (both verbal and written).
• Team player with initiative and a positive attitude towards learning.

Crown Equipment Sdn. Bhd. is looking for a dedicated and skilled individual to join our team as a Service Technician in our Workshop. In this hands-on role, you will be responsible for the diagnosis, maintenance, and repair of a variety of forklift, reach truck, pallet truck, other material handling equipment, ensuring reliability and safety for our clients. Our workshop is equipped with state-of-the-art facilities, and you will play a critical role in maintaining the high standards of service that Crown is known for.

Your expertise will be instrumental in troubleshooting technical issues, performing scheduled maintenance, and executing repairs in a timely and efficient manner. You will work closely with our service team and other technicians to enhance customer satisfaction and ensure equipment performance meets industry standards.

We are seeking a proactive individual with a strong technical background and a passion for problem-solving. If you are eager to develop your skills and contribute to a team that values quality, safety, and innovation, Crown Equipment Sdn. Bhd. is the perfect place for you to advance your career.

Responsibilities

• Diagnose and repair mechanical and electrical issues on various types of material handling equipment specifically Forklift.
• Perform scheduled inspections and preventative maintenance to ensure optimal performance.
• Maintain detailed records of service activities and parts used in repairs.
• Collaborate with the workshop team to improve processes and enhance service delivery.
• Stay current with industry standards, safety protocols, and technical advancements.
• Provide exceptional customer service and communicate effectively with clients regarding repairs and maintenance.
• Participate in training programs to enhance technical skills and knowledge of equipment.

• SPM, Diploma or equivalent in Mechanical Engineering, Electrical Engineering, or a related field SKM, etc.
• Proven experience as a forklift / service technician or mechanic in a similar industry.
• Strong mechanical and electrical troubleshooting skills.
• Excellent problem-solving abilities and attention to detail.
• Ability to work independently and in a team-oriented environment.
• Good communication skills and committed to work.

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

ESSENTIAL DUTIES AND RESPONSIBILITIES:

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

Role Description:

• Responsible for providing professional maintenance, inspection, troubleshooting, and repair services for industrial cranes and hoists. This role plays a critical part in ensuring customer equipment operates safely, reliably, and efficiently, while representing the Konecranes brand with strong technical expertise and customer service. Perform preventive maintenance not requiring compliance inspections, corrective maintenance, retrofits, crane installation or commissioning. Technicians can be further classified into "Maintenance Technician" or "Inspector" (i.e. those predominantly performing preventive maintenance) and "Service Technicians" (i.e. those predominantly performing maintenance and retrofits).

Key Tasks :

• Perform preventive maintenance, inspections, troubleshooting, and repairs on overhead cranes, hoists, and related lifting equipment at customer sites.
• Diagnose mechanical, electrical, and control system faults and implement corrective actions.
• Carry out load testing, adjustments, calibrations, and commissioning of crane systems as per company standards and safety requirements.
• Complete service reports, job documentation, and recommendations for customers accurately and on time.
• Provide technical support and professional advice to customers regarding equipment condition, safety risks, and service solutions.
• Ensure all work complies with Konecranes safety policies, ISO standards, and statutory regulations.
• Support emergency call-outs and breakdown service as required.
• Collaborate with the Service team to improve service delivery, technical skills, and customer satisfaction.
• Maintain company tools, service vehicle, and equipment in safe and proper working order.
• Awareness of ISO 14001 & 45001 Standards