Total 160 system technician job vacancies in Maintenance / Repair / Technician category in Malaysia

PRIMARY RESPONSIBILITES

• Effectively and competently perform sample pre-treatment or preparation chemical analysis.
• To ensure that all activities are carried out in compliance with the ISO 17025, SAMM Policy, laboratory’s QA/QC system and SGS GCSC requirement.

SPECIFIC RESPONSIBILITES

• Perform basic laboratory test as per accordance with approved test methods or procedures.
• Assisting Chemist in carrying out laboratory testing, method development and compliance with QA/QC requirement.
• Ensure Good Housekeeping and Good Laboratory Practice (GLP) in the laboratory.
• Ensure the sample preparation equipment are used and maintained in proper way.
• Make sure all relevant raw data or test information to be correctly and accurately recorded in the provided raw data sheet or manual log book.
• To comply with all Health, Safety and Environment (HSE) local regulation (Occupational Safety and Health Act 1996, Factory and Machinery Act 1967, Environmental Quality Act 1974).
• To report any hazard/risk, near-miss and incident in Crystal system.
• Ensure that all Operational Integrity Management System (OIMS) requirements are met.
• Adherence to SGS Health, Safety and Environment (HSE) Policy by uphold a good safety behavior and exercising necessary standard and process when carry out your responsibilities at all times to ensure compliance to the HSE requirements.
• Perform any other responsibilities as assigned by your reporting manager and/or Senior Management

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible to sustain test equipment with minimal downtime.
• Provides Manufacturing and Equipment support needs in a rapidly changing development and high volume manufacturing environment.
• Dismantles, adjusts, repairs, and assembles equipment according to schematics, repair manuals, or specifications.
• Performs preventive maintenance, repairs, and troubleshooting diagnosis on production equipment.
• Resolves non-standard problems, works with minimal supervision, and can adjust to rapidly changing priorities.
• Must be a self-starter capable of managing own activities as well as supporting team activities.
• Works with Engineering to support new equipment installations and improvement initiatives.
• Responsible for improving and sustaining the equipment capability and meet the KPI (Availability, OEE and Yield)
• Assist engineer during DOE and improvement project.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Die Prep equipment day to day line sustaining, PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 WHY analysis.
• Be available for overtime work as of when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct  buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

• Perform basic laboratory test as per accordance with approved test methods or procedures.
• Assisting Microbiologist in carrying out laboratory testing, method development and compliance with QA/QC requirement.
• Ensure Good Housekeeping and Good Laboratory Practice (GLP) in the laboratory.
• Ensure the sample preparation equipment are used and maintained in proper way.
• Adhere to group HSE safety procedures.
• Make sure all relevant raw data or test information to be correctly and accurately recorded in the provided raw data sheet or manual log book.
• To comply with all Health, Safety and Environment (HSE) local regulation (Occupational Safety and Health Act 1996, Factory and Machinery Act 1967, Environmental Quality Act 1974).
• To perform any other task as assigned by his/her superior.
• To report any hazard/risk, near-miss and incident in Crystal system.
• Ensure that all Operational Integrity Management System (OIMS) requirements are met.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Equipment Maintenance and Repair:

• Sustain backend equipment backend equipment - Package saw, Solder ball attach, Laser cut , Laser mark and AOI uptime above the targeted goals.
• Troubleshoot and repair equipment to ensure smooth production operations.

Preventive Maintenance:

• Complete all scheduled Preventive Maintenance (PM) activities and equipment conversions within the stipulated time.
• Ensure zero post-maintenance issues.

Performance Metrics:

• Maintain and improve Mean Time Between Alarms (MTBA), Repeat Alarm metrics, and Overall Equipment Effectiveness (OEE) to meet or exceed set targets.

Continuous Improvement:

• Identify and address recurring issues to enhance equipment reliability and efficiency.
• Collaborate with the engineering team to implement process improvements.

Documentation and Reporting:

Maintain detailed records of maintenance activities, repairs, and equipment performance.

Generate and submit reports on equipment status and any deviations from goals.

Safety and Compliance:

• Adhere to safety protocols and ensure all maintenance activities comply with company and regulatory standards.
• Participate in Safety, 6S audits and training sessions.

• Perform routine laboratory tests on milling, batching, packing samples, and raw materials according to SOP, ensuring timely and accurate results.
• Report any quality defects or arising issues to the superior for further action.
• Issue Non-Conformance Reports (NCR) for product quality defects and update NCR records accordingly.
• Conduct additional testing related to competitor’s flour analysis, flour streaming studies, complaints, and R&D evaluations as assigned.
• Accurately record and file test results, graphs, and other documents with no errors.
• Ensure strict compliance with safety procedures and regulatory requirements such as HACCP, FSSC 22000, HALAL, and Good Laboratory Practice.
• Serve as a backup to change formulas in IFIX after normal shifts, during weekends, and on public holidays as instructed.
• Support and comply with FSSC 22000 requirements and actively participate in related activities.
• Perform any other tasks and assignments as directed by management.

Key Duties and Responsibilities

1. To execute corrective measures with high efficiency whenever there is a breakdown and record down the clear definition of corrective actions in B-core CMMS.
2. To support machine product EWAK changeover or conversion activities to ensure changeover time range fulfill operation target setting.
3. To support module engineer for workstation and equipment setup and troubleshooting
4. To assist maintenance engineer achieve department goals and KPIs.
5. To attend all breakdowns promptly
6. To assist module engineer for fixture/tool modification and replacement.    
7. Support PM task base on real time condition required, planned schedule or manpower availability.
8. Maintain 5S in work area and comply with Bosch health and safety compliance
9. To support on any other section related duties assigned to current team.
10. Comply with safety ground rules and requirement to carry out the maintenance.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Operations Monitoring: Oversee semiconductor solid state drive (SSD) mechanical assembly manufacturing processes, ensuring production runs smoothly and efficiently while maintaining optimal output levels and component precision standards.
• Troubleshooting & Maintenance: Identify machine malfunctions in SSD assembly equipment, troubleshoot complex mechanical and electromechanical issues, and perform routine maintenance to minimize production disruptions and ensure assembly accuracy.
• Process Optimization: Collaborate with engineers to improve SSD mechanical assembly workflow, reduce downtime, enhance product quality, and optimize assembly sequences through continuous improvement initiatives.
• Documentation & Reporting: Compile data, create evaluation reports, and document troubleshooting findings specific to SSD assembly processes to maintain accurate equipment and process records.
• Compliance & Safety: Maintain 5S standards in SSD assembly areas, follow safety protocols for semiconductor manufacturing environments, and ensure quality standards are met across all mechanical assembly operations.
• Quality Assurance & Inspection: Conduct inspections and quality checks on SSD mechanical assemblies to ensure adherence to established specifications, dimensional tolerances, and industry standards.
• Team Collaboration: Work cross-functionally with production teams, engineers, and supervisors to resolve SSD assembly-related issues and implement process improvements.
• Training & Mentoring: Provide guidance and technical support to junior technicians on SSD mechanical assembly procedures and assist in their professional development.

1.Role                                                                                                                                                                       1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve
production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3.
1.2 Responsible for 1st level failure analysis of reject tools or components from production
line to identify process or supplier related issue for failures which are unable to be solve
by shopfloor leaders.
1.3 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production with guidance from Senior Technician.

2.Job Scope
2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production.
2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities.
2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor.
2.4 To assist Manufacturing Engineering document: Visual aids PQI, work instructions WI, 7S photo, Inspector Work Sequence, Quality Alert & Quality awareness presentation material for briefing purpose.
2.5 To perform daily complaint of raw material to PUQ and assist in scrap preparation if necessary.
2.6 To train and monitor repairers on daily rework activities.
2.7 To support Production in achieving the effectiveness/productivity, output, FOR and quality target.
2.8 To support and involve in BPS activities such as Point CIP projects, LLD, Change Over, TPM or process/product improvement.
2.9 To participate in all scraping audits, coordinate in providing and implementing corrective actions.
2.10 To prepare & submit the scrap form which need submitted daily scrap for management
approval.
2.12 Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and
process meet the capability requirement during new product introduction and mass
production.
2.13 Support VSE/FPV in coordination of PDP project sample build (Pre-Pilot and Pilot run) on
material availability and jig and fixtures readiness.
2.14To assist the Process Engineer / Supervisor in the day-to-day operation.
2.15To support an acting as supervisor if Supervisor & LO no turn up.
2.16To carry out any other duties assigned by immediate superior time to time.

Sebagai sebuah syarikat elektronik yang berkembang pesat, kami sedang mencari calon yang boleh menunjukkan kepakaran mereka dalam membentuk asas kukuh untuk pasukan perkhidmatan kami, terutamanya dalam bidang pemasangan dan perkhidmatan penghawa dingin (Air Con). Juga berperanan sebagai menjadi sumber teknikal utama untuk pasukan perkhidmatan pelanggan kami, membantu mereka bagi memastikan penyelesaian yang lancar dan cepat.

Tanggungjawab Juruteknik Penghawa Dingin termasuk tetapi tidak terhad kepada

• Memasang, memeriksa, menyelenggara, dan membaiki pelbagai jenis dan jenama penghawa dingin komersial dan kediaman.
• Melaksanakan penyelenggaraan preventif berkala dan kerja-kerja pembetulan pada sistem penghawa dingin.
• Mencari punca masalah elektrik dan mekanikal jika ada kerosakan.
• Melaksanakan kerja-kerja membaiki seperti penggantian kompresor penghawa dingin, motor, kipas, dan lain-lain.
• Mengesyorkan kerja-kerja membaiki yang sesuai dan penambahbaikan kepada pelanggan.
• Melaksanakan servis penghawa dingin di kediaman dan premis komersial pelanggan yang termasuk pencucian kimia, pemeriksaan gas, dan perkhidmatan penyelenggaraan umum.
• Memastikan semua kerja-kerja mematuhi standard alat dan Akta Kesihatan dan Keselamatan.
• Melaporkan harian dan mingguan kepada pengurus terus.
• Sebarang tugas lain yang diperlukan oleh penyelia segera.

• Pengalaman praktikal dalam pemasangan, penyelenggaraan (termasuk mencuci kimia), mengesan masalah, dan membaiki penghawa dingin.
• Mampu melakukan kerja fizikal.
• Penguasaan asas bertutur dan menulis dalam Bahasa Melayu dan Bahasa Inggeris
• Lesen memandu GDL.
• Pengalaman minimum 1 tahun diperlukan.
• Selesa bekerja 5.5 hari (Isnin hingga Jumaat 9 pagi hingga 6:00 petang / Sabtu 9 pagi hingga 1 petang).
• Diutamakan dengan sijil Lesen BCA (Lesen Penghawa Dingin) - Pemasangan Sokongan Struktur Untuk Unit Penghawa Dingin atau yang setaraf / Sijil Kebolehan Khas Malaysia (Diutamakan).

• Responsible of machine conversion/setup, repair, PM, calibration and maintenance.
• Maintains inventory of required spare parts, tools and instruments.
• Perform and support production output and quality commitments.

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

• Perform basic laboratory test as per accordance with approved test methods or procedures.
• Assisting Chemist / Microbiologist in carrying out laboratory testing, method development and compliance with QA/QC requirement.
• Ensure Good Housekeeping and Good Laboratory Practice (GLP) in the laboratory.
• Ensure the sample preparation equipment are used and maintained in proper way.
• Adhere to group HSE safety procedures.
• Make sure all relevant raw data or test information to be correctly and accurately recorded in the provided raw data sheet or manual log book.
• To comply with all Health, Safety and Environment (HSE) local regulation (Occupational Safety and Health Act 1996, Factory and Machinery Act 1967, Environmental Quality Act 1974).
• To perform any other task as assigned by his/her superior.
• To report any hazard/risk, near-miss and incident in Crystal system.
• Ensure that all Operational Integrity Management System (OIMS) requirements are met.

• Attend to and troubleshoot test equipment issues during equipment downtime and low-yield situations.
• Set up and configure test equipment for production runs, including handler conversions and load board changes.
• Perform PCB board debugging and repair when test hardware fails during testing.
• Maintain good housekeeping practices and comply with all company and departmental safety rules, regulations, and disciplinary standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

We are looking for a motivated and detail-oriented Failure Analysis Technician to join our team. Prefer fresh graduate or experience. In this role, you will be responsible for investigating and analyzing product failures using Optical Microscope, Atomic Force Microscopy (AFM), OSA and ZYGO  to determine failure defect and support the development of solutions that enhance product reliability. Your hands-on skills and technical expertise will play a critical role in our quality assurance processes.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance ,PM and conversion.
• Able to hands on and provide systematic problem analysis.
• Ability to troubleshoot, analyze complex problems and 5 why analysis.
• Be available for overtime work when needed.
• Experience in PM and major down troubleshooting.
• Responsible to liaise with process engineering team for low yield triggering.

• Safely operate Filling & Packing machine (robot arm) for our amazing coffee products
• Perform quality checking whilst operating machineries

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Responsible to audit line per IPQC Checklist and Work Instruction, compile & analyze IPQC audit results weekly and drive for compliances.
• Responsible to conduct buy off during conversion for items like component traceability, feeder, profile etc.
• Responsible in monitoring the process control in place for critical process.
• To participate in and monitor NPI activities (including tape board buy off).
• Monitor QA Line Stop activity daily and follow up and verify on effectiveness of corrective Action/closure.
• Responsible to perform testing and troubleshooting of circuits, components, instruments and mechanical assemblies. Managing Ongoing Reliability Test (ORT) and Outgoing Quality Assurance (OQA) inventory.
• Responsible for Quality Engineering support which include reviewing WO status, establish process control, review all quality incidents, train operators on required quality process, drive for 6S.
• To compile weekly report for internal and customer review.
• Raise quality alert for line awareness when comes to line excursion or customer feedback
• Other task assigned by superior.

At Cariflex, we specialize in developing, manufacturing and markets specialty polymers and its latex that bring remarkable value and improve lives worldwide. We are on the lookout for a Chemistry Laboratory Technician to support and collaborate with Scientists and and researchers to support ongoing projects. He / She is precise, compliant to given instructions and able to adhere to safety protocols.

• Perform laboratory tests to produce reliable and precise data for scientific investigations.

• Prepare laboratory samples/specimens for testing and conduct prescribed experiments accurately.
• Operate and maintain laboratory equipment and instruments.
• Maintain accurate records of experiments, observations, and results.
• Ensure compliance with laboratory safety procedures and regulatory guidelines.
• Assist in the development of new testing methods and protocols.
• Order and maintain inventory of laboratory supplies and chemicals.
• Collaborate with scientists and researchers to support ongoing studies.

• SPM/STPM Science Stream or Diploma in Science preferably Chemistry
• Ability to speak Bahasa Malaysia and English
• Meticulous, discipline and observant