As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

Role Description:

• Responsible for providing professional maintenance, inspection, troubleshooting, and repair services for industrial cranes and hoists. This role plays a critical part in ensuring customer equipment operates safely, reliably, and efficiently, while representing the Konecranes brand with strong technical expertise and customer service. Perform preventive maintenance not requiring compliance inspections, corrective maintenance, retrofits, crane installation or commissioning. Technicians can be further classified into "Maintenance Technician" or "Inspector" (i.e. those predominantly performing preventive maintenance) and "Service Technicians" (i.e. those predominantly performing maintenance and retrofits).

Key Tasks :

• Perform preventive maintenance, inspections, troubleshooting, and repairs on overhead cranes, hoists, and related lifting equipment at customer sites.
• Diagnose mechanical, electrical, and control system faults and implement corrective actions.
• Carry out load testing, adjustments, calibrations, and commissioning of crane systems as per company standards and safety requirements.
• Complete service reports, job documentation, and recommendations for customers accurately and on time.
• Provide technical support and professional advice to customers regarding equipment condition, safety risks, and service solutions.
• Ensure all work complies with Konecranes safety policies, ISO standards, and statutory regulations.
• Support emergency call-outs and breakdown service as required.
• Collaborate with the Service team to improve service delivery, technical skills, and customer satisfaction.
• Maintain company tools, service vehicle, and equipment in safe and proper working order.
• Awareness of ISO 14001 & 45001 Standards

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

• Equipment Maintenance & Troubleshooting
  • Perform routine preventive maintenance and promptly troubleshoot equipment failures to minimize downtime and ensure stable production.
• Operational Support
  • Support daily manufacturing operations by setting up equipment, responding to alarms, and assisting engineers during process adjustments or trials.
• Compliance & Reporting
  • Follow safety procedures and work instructions, record maintenance activities accurately, and report recurring issues or abnormal conditions for improvement actions.

- Working 12 hour shift. 

- Perform Machines Preventive Maintenance and up keep maintenance record

- First line of defence to attend machines un-schedule down or quality issue

- Team player. Communicate to different departments for collaboration for operational efficiency. 

- In depth knowledge with Automation/Control System.

- Able to handle sudden changes and pressure to bring up machine in short notice. 

- Capable to elaborate and provide feedback on major equipment down times. Chronological events and actions taken. 

- Statistical Process Control knowledge is an added advantage. 

- Understanding of Machine Software such as PLC or C++ will be added advantage in technical capability. 

JOB SUMMARY:

The job involves supporting departmental objectives and daily testing operations, coordinating various processes to enhance specifications and improve quality and cost efficiency. Responsibilities include managing test cell processes, overseeing recipe setups, and improving product quality through early detection and failure analysis. The role also requires ensuring compliance with ISO standards and safety protocols, as well as assisting engineers with operational support and special projects. Continuous improvement in testing processes and quality systems is a key focus.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

JOB SUMMARY:

The job involves supporting departmental objectives and daily testing operations, coordinating various processes to enhance specifications and improve quality and cost efficiency. Responsibilities include managing test cell processes, overseeing recipe setups, and improving product quality through early detection and failure analysis. The role also requires ensuring compliance with ISO standards and safety protocols, as well as assisting engineers with operational support and special projects. Continuous improvement in testing processes and quality systems is a key focus.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives, especially analysis of customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality, triggering systems, and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

Sustaining Technician will be a part of our sustaining team, supporting Product and Test Engineers in ATE sample Testing & Data collection to ensures our product continuity after mass production.  We are seeking a Technician who has experience in handling & maintaining Production Tester. The ideal candidate will work closely with Engineers in Sustaining engineering activities.

Key Responsibilities

• Support Engineer in manual samples ATE testing
• Operate tester and support on remote debugging
• Operate monthly routine tester Calibration and maintain tester condition
• Support Engineer in Data compilation and provide accurate data.
• Lab Equipment Management & Calibration
• Tester debug and tester load board repair
• Support Engineer in Lab bench validation. 

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct  buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

Key Duties and Responsibilities

1. To execute corrective measures with high efficiency whenever there is a breakdown and record down the clear definition of corrective actions in B-core CMMS.
2. To support machine product EWAK changeover or conversion activities to ensure changeover time range fulfill operation target setting.
3. To support module engineer for workstation and equipment setup and troubleshooting
4. To assist maintenance engineer achieve department goals and KPIs.
5. To attend all breakdowns promptly
6. To assist module engineer for fixture/tool modification and replacement.    
7. Support PM task base on real time condition required, planned schedule or manpower availability.
8. Maintain 5S in work area and comply with Bosch health and safety compliance
9. To support on any other section related duties assigned to current team.
10. Comply with safety ground rules and requirement to carry out the maintenance.

1.Role                                                                                                                                                                       1.1 Work with VSO, VSE & Supervisors to maintain, analysis, improve and resolve
production line issues in a responsible manner towards ensure manufacturing meeting Safety, Quality, Cost, and Delivery with guidance from Technician 3.
1.2 Responsible for 1st level failure analysis of reject tools or components from production
line to identify process or supplier related issue for failures which are unable to be solve
by shopfloor leaders.
1.3 Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production with guidance from Senior Technician.

2.Job Scope
2.1 To perform Process Study on Failure Analysis for existing responsible products on all reject & assist time study, cycle time on the process or ISIR sample build / test in production.
2.2 To assist Manufacturing Changeover activities and perform Evaluation / Rejects activities.
2.3 To assist on technical report Cgk, Cmk, GRR, SPC & etc assigned by Process Engineer/Supervisor.
2.4 To assist Manufacturing Engineering document: Visual aids PQI, work instructions WI, 7S photo, Inspector Work Sequence, Quality Alert & Quality awareness presentation material for briefing purpose.
2.5 To perform daily complaint of raw material to PUQ and assist in scrap preparation if necessary.
2.6 To train and monitor repairers on daily rework activities.
2.7 To support Production in achieving the effectiveness/productivity, output, FOR and quality target.
2.8 To support and involve in BPS activities such as Point CIP projects, LLD, Change Over, TPM or process/product improvement.
2.9 To participate in all scraping audits, coordinate in providing and implementing corrective actions.
2.10 To prepare & submit the scrap form which need submitted daily scrap for management
approval.
2.12 Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and
process meet the capability requirement during new product introduction and mass
production.
2.13 Support VSE/FPV in coordination of PDP project sample build (Pre-Pilot and Pilot run) on
material availability and jig and fixtures readiness.
2.14To assist the Process Engineer / Supervisor in the day-to-day operation.
2.15To support an acting as supervisor if Supervisor & LO no turn up.
2.16To carry out any other duties assigned by immediate superior time to time.

• Responsible of machine conversion/setup, repair, PM, calibration and maintenance.
• Maintains inventory of required spare parts, tools and instruments.
• Perform and support production output and quality commitments.

The MRE Engineering Technician is responsible for executing DET Guzik and QMT testing activities, supporting production and engineering operations through accurate data collection, analysis, troubleshooting, and tester buyoff. This role ensures test quality, equipment readiness, and timely data reporting to support continuous manufacturing performance and quality improvement.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform all types of DET Guzik and QMT testing, ensuring no delays and consistent, stable measurement results that meet Test Criteria
• Compile and upload test data to Online SPC timely to meet expected Test TAT, and continuously update all test requests and tracking documentation
• Conduct tester conversion buyoff, troubleshooting, and head changes as required
• Support data package compilation for NPI, SMO, Time Slice and other requests as assigned
• Manage reference and head issuance, inventory, screening activities, and reference generation
• Communicate test information clearly during shift handovers to ensure continuity of operations
• Maintain MRE lab 7S standards, comply with all safety and health regulations, and support engineering teams as directed
• Work in cleanroom environment with rotating 12-hour shift patterns and cross-plant support as required

Job Description

1. Job Summary

1.1 Responsible to ensure all equipment used in test center in good working condition.

1.2 Responsible to arrange daily planned job to test worker.

1.3 Responsible to brief test worker on any newly introduced test item or test method.

1.4 Responsible to prepare Test Material, Test Data Recording Sheet for each test.

1.5 Responsible to ensure test material fulfill test plan specification and control the usage.

1.6 Responsible to perform audit at test center and feedback any finding to superior promptly.

1.7 Responsible to perform product function check, internal inspection after test.

1.8 To perform failure analysis.

1.9 To generate and publish test report after completion of the test.

1.10 Specific task assigned by the superior, as and when necessary, to meet target or deadline.

2. Core Competencies

2.1 Able to use basic measuring equipment such as caliper, multimeter & etc.

2.2 Proficiency in spoken and written English and Bahasa Malaysia.

2.3 Basic computer literacy (e.g. Microsoft Excel and Word)

2.4 Good communication skills

3. Work Conditions

3.1 Able to work on shift

3.2 High inter and intra departmental interaction

3.3 Able to work under tight schedule

• Attend to and troubleshoot test equipment issues during equipment downtime and low-yield situations.
• Set up and configure test equipment for production runs, including handler conversions and load board changes.
• Perform PCB board debugging and repair when test hardware fails during testing.
• Maintain good housekeeping practices and comply with all company and departmental safety rules, regulations, and disciplinary standards.

We are looking for a motivated and detail-oriented Failure Analysis Technician to join our team. Prefer fresh graduate or experience. In this role, you will be responsible for investigating and analyzing product failures using Optical Microscope, Atomic Force Microscopy (AFM), OSA and ZYGO  to determine failure defect and support the development of solutions that enhance product reliability. Your hands-on skills and technical expertise will play a critical role in our quality assurance processes.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.

• ESSENTIAL DUTIES AND RESPONSIBILITIES:

  · Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

  · Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

  · Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

  · Perform product conversions on test equipment to support various production requirements.

  · Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

  · Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

  · Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

  · Perform equipment checklists in accordance with standard operating procedures.

  · Assist engineers with daily tasks and contribute to special projects as required.

  · Ensure compliance with ISO standards and documentation practices.

  · Adhere strictly to all safety rules and cleanroom protocols.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Set up and troubleshoot major downtime issues for test equipment, including Testcell, Tester, Bagger, VDCS, and Conveyor systems.

· Troubleshoot and resolve Testcell yield issues to maintain product quality and throughput.

· Conduct investigations for quality incidents related to test equipment and support root cause analysis and corrective actions.

· Perform product conversions on test equipment to support various production requirements.

· Monitor key process input variables (KPIVs) using tools such as the KPOV database, OEE tracking, Maintenance Logs, and the Digital Preventive Maintenance system.

· Drive and support equipment upgrade and continuous improvement projects to enhance performance and efficiency.

· Act as an upskilling trainer for test equipment, providing technical training and guidance to team members.

· Perform equipment checklists in accordance with standard operating procedures.

· Assist engineers with daily tasks and contribute to special projects as required.

· Ensure compliance with ISO standards and documentation practices.

· Adhere strictly to all safety rules and cleanroom protocols.