• Conduct engineering site surveys to plan equipment and interconnection locations at the site, as well as connections to the existing electrical system.
• Develop and prepare designs for residential solar PV systems, including but not limited to the electrical, structural, and mechanical aspects of the projects.
• Work with the Design Department to confirm the engineering design and decide on the DC equipment and AC interconnection locations at the site, as well as connections to the existing electrical system.
• Liaise with and manage subcontractors regarding their scope of work, schedules, and monitoring the quality of workmanship during installation.
• Record, implement, and manage design change requirements.
• Work with internal and/or external parties such as TNB, consulting firms, and local authorities on licensing applications and documentation.
• Liaise and coordinate with TNB HQ and local authorities on meter installation and grid interconnection of the solar PV system.
• Set up a remote monitoring system and perform testing and commissioning of the solar PV system.
• Review deliverables at project milestones to ensure the project is on schedule and within budget.
• Provide weekly reports and new project schedules to the Head of Department, and proactively update on critical issues such as material shortages, project delivery delays, subcontractor competency, law changes, etc.
• Implement best practices and safe work procedures throughout the project on-site.
• Prepare internal handovers to the O&M department, and communicate with O&M resources during O&M and DLP to ensure compliance with the committed Scope of Work and Service Level Agreement.
• Support O&M in attending to any electrical breakdowns related to solar PV systems during the DLP, initiate fault diagnosis and corrective actions for assigned solar PV projects, and implement new designs or procedures for project installation to avoid recurring faults due to project handling or inappropriate design.
• Provide technical reports for any retention claims from subcontractors due to mishandling, manufacturing claims for product failure, and insurance claims for external factors covered by EAR/WC.
• Monitor system performance by gathering relevant data and producing statistical performance reports before internal handover to the O&M department.

• Possess a Bachelor's Degree/Postgraduate Diploma/Professional Degree in Electrical Engineering or equivalent.
• Preferably have at least 1 year of working experience in electrical installations or the construction industry.
• Fresh graduates are encouraged to apply.
• Proficient in Solar PV system design, AutoCAD, and PVSyst (experience in these will be an added advantage).
• Proficient in AutoCAD, Microsoft Office, Microsoft Project, and ERP systems.
• Customer-oriented, independent, with problem-solving, reporting, and good interpersonal skills.
• Able to work and adhere to tight deadlines.
• Able to multitask and work in a fast-paced environment.
• Comfortable working on weekends and public holidays if required.
• Possess a valid Class D driving license and be able to travel.

• Lead and develop a team of technicians and engineers to achieve key maintenance, quality, and equipment performance goals, ensuring strong readiness and reliability of assets for ongoing and future operations.
   
• Drive the implementation and continuous improvement of TPM pillars, including maintenance KPI (OEE,MTBF,MTTR, tDt), preventive maintenance, autonomous maintenance, and focused improvement to strengthen equipment uptime and stability.
   
• Champion maintenance excellence by coordinating effective planning of maintenance activities, optimizing resource utilization according to company policy, RBA and local labor legal requirement, overseeing equipment condition monitoring, and conducting risk assessments for equipment reliability.
   
• Provide mentorship, coaching, and structured training to build technicians’ technical capability, career growth, and motivation toward achieving departmental objectives.
   
• Instill systematic problem-solving culture, applying root-cause analysis and problem solving tools, LEAN concepts, and reliability-based approaches to eliminate chronic losses.
   
• Foster an inclusive, collaborative, and high-performance team environment that encourages ideas, cross-functional cooperation, and continuous professional development.
   
• Establish, review, and refine maintenance standards, equipment specifications, and long-term toolings care strategies to ensure sustainable performance.
   
• Assist in the planning, formulation, and monitoring of MOC and TPM budgets, ensuring spending compliance with operational priorities.
   
• Promote strong teamwork culture aligned with VS principles, strengthening synergy between operational teams and functional excellence.
   
• Identify and drive initiatives that enhance technical competency, TPM proficiency, and subject-matter expertise among technicians and maintenance personnel.
   
• Ensure full compliance with regulatory, safety, health, and environmental requirements, promoting safe work practices and strong TPM discipline.
   
• Undertake any other tasks or responsibilities assigned by the immediate superior

The Hardware Test Engineer is responsible for driving ATE test solutions for devices and module roadmap and solutions for Renesas’ AI-focused semiconductor portfolio. The position plays a critical role in ensuring product delivery ensuring robust backend solution with no quality issues for AI power semiconductors supporting data center, accelerator, and advanced computing applications.

Key Responsibilities

• Project manage the design and logistics of load boards, probe cards, test sockets and change kits from definition, RFQ, design review and approval to NPI or Production Release.
• Main contact with load boards, probe cards, test sockets and change kit vendors for technical, commercial and operational aspects.
• Manage and monitor spending budget for load boards, probe cards, test sockets and change kits, manage and maintain the tool/system for ATE hardware request and tracking hardware inventory.
• Identify and execute areas for Gross Margin Improvement Initiatives in areas related to load boards, probe cards, test sockets, change kits.
• Interface with cross-functional (Product Group’s engineering, operation etc.) teams for forecast on load boards, probe cards, test sockets and change kits and execute to support NPI timeline, revenue and capacity
• Technical expertise in module testing (socket, board, change kit and handling) on ATE/handlers and providing technical direction for production solution

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

Analog and Mixed Signal Business Unit (AMS) is looking for a Snr Staff Product Engineer to join our team to drive the product development of state-of-the-art products. This is a unique and exciting opportunity to work with a cross-functional team to bring a product to volume production starting from product conception to production release. The job scope includes but is not limited to, development of the test plan to ensure datasheet specifications are met. Own the qualification plan and the execution to comply with various JEDEC/AEC quality standards. Own product quality assessment through reliability tests. Collaborate with multi-functional teams such as Design, Test, Applications and Failure Analysis teams during first silicon debug and to root cause field failures. Creation and maintenance of product BOM. Monitor production data to address yield and quality deficiencies using statistical analysis.

Key Responsibilities:

• Full PE product lifecycle ownership from concept to end of life with a focus on ensuring the delivery of the highest quality products to our end customers

• Provide support for DfT, Product releases and Qualifications in Penang

• Compliance to Jedec and AEC standards

• Datasheet and automotive compliance reports

• Real time customer support for design, product and quality related issues

• Temperature/Voltage/Process characterization and production limit setting

• Product new product introduction and yield ownership

• Product BOM release and maintenance

• Excursion management for both suppliers and customers

• Use commercially available yield tools for yield improvement and monitoring, generate weekly reports and review with PE teams

• KPI achievement in product related deliverables including NPI execution and velocity, product cost (Gross margin improvements), product quality performance and failure analysis cycle times

• PAT, SYL, SBL, SPC limit and disposition optimizations to protect quality without excessive waste

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management.

We are seeking a Process Engineer with a minimum of 2 years of hands-on experience in semiconductor back-end assembly processes, particularly die bonding and wire bonding. The successful candidate will be responsible for process setup, optimization, yield improvement, and troubleshooting to ensure stable and high-quality manufacturing performance.

The role requires strong technical understanding of back-end equipment, materials, and process interactions, as well as the ability to analyze data, drive continuous improvement, and support production operations.

Key Responsibilities

• Develop, optimize, and sustain die bond and wire bond processes to meet quality, yield, and reliability requirements
• Perform process troubleshooting and root cause analysis for yield loss, defects, and equipment issues
• Support new product introduction (NPI), process qualification, and transfer to mass production
• Establish and maintain process parameters, work instructions, and control plans
• Analyze process data using statistical methods (e.g. SPC, CPK, trend analysis)
• Collaborate with cross-functional teams including Production, Quality, Equipment, and R&D
• Drive continuous improvement activities for cost, yield, cycle time, and reliability 

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

1. Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
2. Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
3. Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
4. Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
5. Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
6. Implement best known practices and process within test manufacturing sites
7. Drive Gross Margins (OEE, Yield, Retest) improvement initiatives

Job Summary
Role
1.1 MT Product Purchasing Buyer for related MT Product Group(s) in PgP2 along the complete Product Life Cycle (incl. product relocation).
1.2 MT Purchasing Strategy-, Quality- and Target Cost responsibility and accountability for MT Product Groups in PgP2.
1.3 MT contact interface to Material Field purchasing (Commercial, Quality). Assure aligned messages for the related Product Group from MT to the Material Field Purchasing.
1.4 Escalation in the MT-Pg for Purchasing related issues (commercial, quality, logistics).
1.5 Prepare aligned MT-Pg Product Group Purchasing Strategy for PT-MT/PPU

Job Scope
2.1 Definition & Maintenance of a Product Group Purchasing Strategy considering TTM and Value Stream targets of MT-PgP.
2.2 Product Group interface from Purchasing to MT.
2.3 Leading and responsible for the RPP activities in the respective Product Group (creation, implementation, cooperation cross-functionally) at PgP location.
2.4 Early Supplier involvement in PIF to support Product Innovation and Target Cost Achievement (PILUM).
2.5 Support Annual Price Negotiation by providing new potential business opportunities of Product. Group in pipe-line.
2.6 Challenge and support Material Field buyers to achieve Best Material Field Costs
2.7 Support Material Field Buyers for contracting (e.g. SE-contracts, NDA, Concept Competition etc.)
2.8 Create transparency of costs of Product Group by benchmarking (support the Global Product Champion).
2.9 Responsible for achievement of Best Costs in Product Group (Benchmarking, TCO, RPP) before / after SOP.
2.10 Responsible for Product Group related quality activities (e.g. ISIR, 8D, PQA, etc.)
2.11 First escalation level for Quality and Logistics related supplier issues from Plant.
2.12 Takes care of purchasing related topics/tasks in the Value Stream.
2.13 Ad-hoc tasks as assigned from time to time.
 

Key Responsibilities

• Develop, implement, and monitor cleanroom environmental surveys, to verify compliance and support area buy-off.                             
• Develop and execute contamination sampling plans for cleanroom environmental, equipment, tools, and process samples to ensure cleanliness and prevent yield-impacting defects.                            
• Perform routine and event-based environmental and equipment sampling to support operational readiness and cleanroom classification.                                
• Manage handling and qualification of cleanroom indirect materials by setting cleanliness criteria, performing inspections, and approving materials for use.                                   
• Define cleanroom protocols, including gowning, behavior, and contamination prevention practices, and provide training to ensure compliance.                                   
• Define and coordinate with laboratories implement test plans, analyse cleanliness data, investigation deviations, and recommending mitigation actions for product & process cleanliness compliance.    
• Collaborate with cross-functional teams in production, facilities, quality, and engineering to support contamination control strategies and maintain acceptable cleanliness levels.

BROAD FUNCTIONS :

• To plan, coordinate and follow-up sputter systems start-up / conversion activities and process documentation.
• To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
• To lead sputter process related issues trouble shooting (common causes), work closely with shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time), yield & quality goal.
• To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
• To lead, supervise and coach/train process tech, include engineering specialist and characterize technicians.

RESPONSIBILITIES :

Regular

• Responsible for sputter process related issues trouble shooting (common causes), work closely with Shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time) & quality goal.
• Responsible to lead, supervise and coach/train process tech, include engineering specialist and characterize technicians. Responsible to train and share PMR/DS sputter process and yield improvement knowledge with the team.
• Responsible for sputter parameters monitoring, include online SPC monitoring and procedure conformance.
• Responsible for sputter machine start-up include process characterize (new products & process changes).
• Responsible for new products/machines/process qualification.
• Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).
• Others include FMEA.
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules

Irregular

• Responsible to assist in sputter yield related issues trouble shooting (common causes). Work closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order to achieve sputter yield goal. This includes 0725 Operation Yield Improvement.
• Other supervisor assigned task
• Improve Media magnetic baseline: ACC% and to enable process stability and repeatability via recipe tuning and optimization. Responsible for new product qualifications.  

The Senior Packaging Engineer will lead packaging development and qualification activities for WD's HDD and Flash storage products. This is a technically hands-on and cross-functional leadership role — you will mentor junior engineers, drive complex packaging programs, and interface directly with customers, suppliers, and global engineering teams.

You are expected to operate with high autonomy, make independent technical decisions, and represent the Packaging Engineering function in NPI and sustaining programs.

Key Responsibilities : 
Technical Leadership

• Lead end-to-end packaging design, development, and qualification for complex HDD/Flash programs
• Define packaging architecture and material strategy for new and sustaining products
• Make independent technical decisions on packaging design trade-offs (cost vs. protection vs. sustainability)
• Act as Subject Matter Expert (SME) for packaging within cross-functional teams

Design & Qualification

• Own packaging qualification plans and test execution per ISTA/ASTM standards
• Review and approve packaging specifications, BOMs, and qualification reports
• Lead Engineering Change Orders (ECOs) and deviation requests
• Drive DFM (Design for Manufacturability) and DFA (Design for Assembly) reviews

NPI & Program Management

• Lead packaging workstream for NPI programs from concept to mass production
• Manage packaging milestones and deliverables within program timelines
• Interface with global product teams, customers, and contract manufacturers

Vendor & Supply Chain

• Develop and qualify new packaging suppliers in Malaysia/ASEAN
• Lead supplier performance reviews and cost negotiation
• Drive packaging cost reduction (cost down) initiatives

People & Mentorship

• Mentor and coach junior/mid-level packaging engineers
• Conduct technical reviews and provide guidance on complex issues
• Support team capability building and knowledge sharing

Compliance & Sustainability

• Ensure all packaging meets regulatory requirements (RoHS, REACH, ISTA)
• Champion WD sustainability goals through eco-packaging innovation
• Maintain quality documentation per WD QMS standards

Continuous Improvement

• Lead RCCA for field packaging failures and damage incidents
• Drive Lean/Six Sigma improvement projects within packaging function
• Benchmark industry trends and propose technology upgrades

To work on the following tasks with guidance:
1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team
accordingly to following requirement:
a. To track project budget and ensure equipment cost within the planed budget.
b. On time delivery of test systems to the production line according to project milestone (include
manage of equipment, hardware interface and mechanical jig and fixture purchase)
c. Release the test system according to Test System Release Procedure.
d. To train and coach maintenance team to be able to handle test system breakdown more
effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target.
(eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System
Setup guideline and test fixture and job design concept)

2. To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:
• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine
efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling
from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

Job Summary

• Responsible for 1st level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by Failure Analyzer.
• Responsible for monthly FOR (Fall Off Rate) data entry into FOR database for tracking of FOR and Internal Defect Cost (IDC).
• Prepare rework flow for any non-conformities detected at production line for sorting or rework activities.
• Responsible to follow up and track the status of rejected parts complained to supplier via Purchasing Quality engineer (PUQ).
• Responsible to coordinate measurement support activities for verification of part dimension in order to determine root cause of rejection found in the line.
• Update PVS system (Part Verification System) for setting up part number for barcode scanning activities to avoid missing or wrong items been shipped to customer.
• Support VSE in preparing and update In Process Checklist, Production Work Instruction (PWI), Production Quality Indication (PQI) and Quality Alert for daily production usage.
• Assist VSE in preparation of workstations layout, set up workstation and line release documents before Pre-Pilot run, Pilot Run and mass production.
• Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production.
• Support VSE in coordination of PDP project sample build (Pre-Pilot and Pilot run) on material availability and jig and fixtures readiness.
• Support process improvement project in production through time study - VT improvement, direct productivity improvement, ergonomic, workstation, machine and technology.
• Support production in achieving the effectiveness, output, FOR and quality target through continuous improvement activity.
• Liaise with maintenance personnel for maintenance plan set up and spare parts replacement for existing machine used in production whenever necessary.

Job Scope

• Prepare workstation layout, set up workstation and assist VSE/FPV in preparation of line release documents during pre-pilot run, pilot run and SOP.
• Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and process meet the capability requirement during new product introduction.
• Support VSE in coordination of PDP project sample build (Pre-Pilot and Pilot run) on material availability and jig and fixtures readiness.

 Operation Support

• Responsible for l51 level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by Failure Analyzer.
• Responsible to coordinate measurement support activities for verification of part dimension in order to determine root cause of rejection found in the line.
• Responsible to follow up and track the status of rejected parts complained to supplier via Purchasing Quality engineer (PUQ).
• Responsible for monthly FOR (Fall Off Rate) data entry into FOR database for tracking of FOR and Internal Defect Cost (IDC).
• Support VSE in preparing and update In Process Checklist, Production Work Instruction (PWI), Production Quality Indication (PQI) and Quality Alert for daily production usage.
• Prepare rework flow for any non-conformities detected at production line for sorting or rework activities.
• Update PVS system (Part Verification System) for setting up part number for barcode scanning activities to avoid missing or wrong items been shipped to customer.
• Support production in achieving the effectiveness, output, FOR and quality target through continuous improvement activity.
• Support process improvement project in production through time study - VT improvement, direct productivity improvement, ergonomic, workstation, machine and technology.
• Liaise with maintenance personnel for maintenance plan set up and spare parts replacement for existing machine used in production whenever necessary.
• Coordinate laser marking drawing conversion activity into laser marking machine and ISIR sample submission.

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training, and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support systems comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

• Job Summary:
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.